28
9
Webpage configuration
You can set up the VCT through its own internal web page. Click the Open
webpage button in RaytecMaint
to take you directly to the VCT6’s web pages.
You can also type the light’s IP address (displayed in RaytecMaint) into your
web browser, which will display the main page. RaytecMaint software is
available from
9.1
Main page
The Main page (shown below) is the first to open when you access the VCT6's
web pages. This gives the light's hardware and firmware revision levels, its
serial number and identifies other devices on the network.