5
RaySafe i3 Installation & service manual – Preparations
PREPARATIONS
The installation process may take a few hours.
PRE-INSTALLATION CHECKLIST
During the installation, you will need the following information.
Reference dosimeter serial number:
Printed on the back side of the reference dosimeter.
Real-time Hub IP address
1
:
From the hospital’s IT department.
Video Unit IP address
1
:
From the hospital’s IT department.
Subnet mask:
From the hospital’s IT department.
Default gateway:
From the hospital’s IT department.
DNS server
2
(recommended):
From the hospital’s IT department.
NTP1
2
(recommended):
From the hospital’s IT department.
NTP2
2
(recommended):
From the hospital’s IT department.
1)
You might need to provide MAC addresses for the Video Unit and the Real-time Hub to the hospital’s IT department.
MAC addresses are printed on the back side of the products.
2)
If you want to use NTP servers defined by hostnames, you also need the IP address of a DNS server and the names
of the NTP servers.
SYSTEM PASSWORDS
During the installation, you will also be prompted to enter new passwords for signing in. You can document the new
passwords for your system here.
Video Unit password:
Real-time Hub, Data export password:
Real-time Hub, System configuration password: