21
RaySafe i3 Installation & service manual – Real-time View explained
REAL-TIME VIEW EXPLAINED
20
2
0.2
mSv/h
Ms. Ranger
Dr. Bauer
Mr. Peterson
Mr. Anderson
Dr. Samova
Ms. Burrows
Dr. Smith
Ms. Lewis
A
B C
D
E
G
F
Figure 12. Real-time view, graphical components.
A:
Dose rate scale (see “Configuration tab” on page 28 for settings)
B:
Dosimeter color (can be set using Dose Viewer, see “Initiate a Real-time Dosimeter” on page 8)
C:
Dosimeter display name (can be set using Dose Viewer, see “Initiate a Real-time Dosimeter” on page 8)
D:
Real-time dose rate bar in green, yellow or red, depending on the current dose rate. Updated once per second.
E:
Dose rate peak, the highest dose rate value recorded during the last 15 seconds.
F:
History dose rate bars for the last seven dose events. The history bars are updated for all dosimeters whenever at
least one dosimeter has a detected dose event, with the most recent event to the right.
G:
Area reserved for error messages.
NOTE:
The history bars are omitted when service mode is on. When the dosimeter battery needs to be
replaced, a battery symbol is shown instead of the history bars for the specific dosimeter.