4.4.UDP Receive mode setup
To set up the port into the UDP Receive mode, just add the UDP port number.
UDP Port
:
Add the port number of the UDP port to be monitored by GPORT.
4.5.UDP Send mode setup
With UDP Send mode, the user can designate a maximum amount of 4 mainframes.
Upon reception of data, GPORT ports will send them to the mainframes designated by
the user simultaneously for multi- mainframe backup.
IP Address
:
Add IP addresses of designated mainframes.
UDP Port
:
UDP port numbers of designated mainframes
(
Notice the difference to the UDP Receive mode. The mainframe monitor UDP
port number is added here while the GPORT monitor UDP port number is
added in the UDP Receive mode.
)
.