E
I
J
G
K
Press the Casters (A) into the hole at the end
of each leg of the Base (B).
Insert Seat Post (C) into the center hole of the
Base (B).
Please be careful to use the correct
YELLOW Screws (I) and Washers (J).
For easy assembly, place the Seat Cushion(D)
face down on a flat surface. Attach the Armrest
(F) to the Seat Cushion (D) using 8 Screws (I)
and 8 Washers (J). Tighten securely with the
enclosed Allen Wrench (H).
Please be careful to use the correct BLUE
Screws (K) and Backrest Screw Caps (G).
Insert 4 Screws (K) into the predrilled
holes as
shown in the diagram above. Tighten securely
with the enclosed Allen Wrench (H).
Insert 1 Backrest Screw Caps (G) over each of
the 4 screws on the Backrest to cover the
exposed holes of the Backrest (E).
Turn the assembled seat upright and locate
the center hole of the Mechanism over the
seat post. Push down firmly until the
connection is secure.
E
Energy Pro Series
With the two upright bars pointing straight up,
lower the backrest (E) onto the two upright
bars so they slide into the holes on each side
of the backrest. Push down until the
connection is secure.
