Page 1: ...stable wrench spanner 7 Marine grade sealant non acetate based 8 Adhesive tape Warning Transducer operation Only test and operate the transducer in the water Do NOT operate out of water as overheating...
Page 2: ...d shaft s 3 Planing hull Stepped hull mount on the first step as far aft as possible 4 Dis place ment hull Displacement hull mount approximately 1 3 of the way along the lenqth of the hull measured al...
Page 3: ...ng a sultable sized wrench spanner ln order to prevent leaks and transducer movement ensure that the nut is adequately tightened You shou d see the sealant protruding from the edges of all applied sur...
Page 4: ...ducer installations it may be necessary to extend the transducer cable 3 m 9 8 ft 5 m 16 4 ft and 8 m 26 2 ft transducer extension cables are available part numbers 3 m 480475 5 m 480476 8 m A8O477 lt...
