Raymarine RSW-Wired, Installation Instructions Manual

Page: 62 / 74

Speed and Temperature transducers:
Part number
Description
E26008 P371 Thru-hull.
E26005 ST69 Transom mount.
E26031 ST800 -P120 Thru-hull.
M78716 ST800 -B120 Thru-hull.
E70673 ST900 -P120 Thru-hull, with 13.7 m (44.95 ft) fitted cable.
E70674 ST900 -P120 Thru-hull, with 20 m (65.62 ft) fitted cable.
E70686 ST900 -B120 Thru-hull, with 13.7 m (44.95 ft) fitted cable.
E70687
ST950 -P17 Thru-hull with 6 m (19.69 ft) fitted cable.
E25025 P17 Thru-hull
17.5 SeaTalkng ® cables and accessories
SeaTalkng ® cables and accessories for use with compatible products.
SeaTalkng ® kits
SeaTalkng kits enable you to create a simple SeaTalkng backbone.
Starter kit (part number: T70134) consists of:
1. 1 x Spur cable 3 m (9.8 ft) (part number: A06040 ). Used to connect
device to the SeaTalkng backbone.
2. 1 x Power cable 2 m (6.6 ft) (part number: A06049 ). Used to provide
12 V dc power to the SeaTalkng backbone.
3. 2 x Backbone terminators (part number: A06031 ). Terminators must be
fitted to both ends of the SeaTalkng backbone.
4. 1 x 5-Way connector (part number: A06064 ). Each connector block
allows connection of up to 3 SeaTalkng devices. Multiple connector
blocks can be ‘daisy chained’ together.
Backbone kit (part number: A25062) consists of:
1. 2 x Backbone cables 5 m (16.4 ft) (part number: A06036 ). Used to create
and extend the SeaTalkng backbone.
2. 1 x Backbone cable 20 m (65.6 ft) (part number: A06037 ). Used to
create and extend the SeaTalkng backbone.
3. 4 x T-piece (part number: A06028 ). Each T-piece allows connection of
one SeaTalkng device. Multiple T-pieces can be ‘daisy chained’ together.
62