Raymarine RSW-Wired, Installation Instructions Manual

Page: 35 / 74

• NMEA 0400 Installation Standard
• ABYC E-11 AC & DC Electrical Systems on Boats
• ABYC A-31 Battery chargers and Inverters
• ABYC TE-4 Lightning Protection
Warning: Product grounding
Before applying power to this product, ensure it has been
correctly grounded, in accordance with the instructions
provided.
Warning: Positive ground systems
Do not connect this unit to a system which has positive
grounding.
9.7 Power connection via Autopilot Control Unit
(ACU)
The SeaTalkng ® backbone can be supplied 12 V dc power from a compatible
Raymarine Autopilot Control Unit (ACU).
Important:
The SeaTalkng ® backbone must have a single power supply connection,
if your SeaTalkng ® backbone is supplied power directly then you must
ensure that the SeaTalkng ® power switch on your ACU is switched Off.
Note:
ACU-100, ACU-150 and SPX-5 autopilot control units cannot supply power
to the SeaTalkng ® backbone.
1. Fuse for SeaTalkng ® power supply.
2. Power switch for SeaTalkng ® power supply (Must be switched [ON] to
provide power to the SeaTalkng ® backbone.
3. ACU / SPX autopilot to SeaTalkng spur cable (part number: R12112).
Power connection 35