
Note:
In areas of extreme EMC interference, some slight interference may be noticed on the
product. Where this occurs the product and the source of the interference should be separated
by a greater distance.
For
optimum
EMC performance we recommend that wherever possible:
• Raymarine equipment and cables connected to it are:
– At least 1 m (3.3 ft) from any equipment transmitting or cables carrying radio signals e.g. VHF
radios, cables and antennas. In the case of SSB radios, the distance should be increased to 2
m (6.6 ft).
– More than 2 m (6.6 ft) from the path of a radar beam. A radar beam can normally be assumed to
spread 20 degrees above and below the radiating element.
• The product is supplied from a separate battery from that used for engine start. This is important
to prevent erratic behavior and data loss which can occur if the engine start does not have a
separate battery.
• Raymarine specified cables are used.
• Cables are not cut or extended, unless doing so is detailed in the installation manual.
Note:
Where constraints on the installation prevent any of the above recommendations
, always ensure
the maximum possible separation between different items of electrical equipment, to provide the
best conditions for EMC performance throughout the installation.
Declaration of conformity
FLIR Belgium BVBA declares that this product is compliant with the essential requirements of EMC
Directive 2014/30/EU.
The original Declaration of Conformity certificate may be viewed on the relevant product page at
.
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling of waste
electrical and electronic equipment which contains materials, components and substances that may
be hazardous and present a risk to human health and the environment when WEEE is not handled
correctly.
Equipment marked with the crossed-out wheeled bin symbol indicates that the
equipment should not be disposed of in unsorted household waste.
Local authorities in many regions have established collection schemes under
which residents can dispose of waste electrical and electronic equipment at a
recycling center or other collection point.
For more information about suitable collection points for waste electrical
and electronic equipment in your region, refer to the Raymarine website:
Warranty registration
To register your Raymarine product ownership, please visit
and register online.
It is important that you register your product to receive full warranty benefits. Your unit package
includes a bar code label indicating the serial number of the unit. You will need this serial number
when registering your product online. You should retain the label for future reference.
8
Summary of Contents for RMK-10
