Chapter 6: Customizing the Chartplotter
75
Customizing the
Screen Display
Setting Up a Differential Beacon
Normally, your differential beacon receiver (if fitted) automatically picks up the
transmitted differential signal. If there are two differential beacons competing
in a region, you may wish to set up the beacon manually. The Beacon Set Up
menu also indicates Beacon status and can be used to return to auto mode after
having set up the beacon manually.
➤
To set up a differential beacon manually:
1. Press the
BEACON
soft key. The current settings, read from the beacon
receiver (if connected) are displayed as shown below:
D4202_1
2. Press
ENTER
, then select
AUTO
or
MANUAL
mode. When manual mode is
selected, you are prompted for frequency and bit rate.
Use the trackpad to select the required bit rate, and to edit the beacon
frequency to the required value.
3. Press
ENTER
to accept the changes, or
CLEAR
to cancel.
4. Press
CLEAR
or
ENTER
to return to the Fix Status screen, and
CHART
to
return to the chart.
Summary of Contents for RayChart 630
