66
RayChart 620 and 630
Setting Up
the Data
Keypress Sound
This option controls whether or not the chartplotter beeps when you press a key
or when an alarm is activated.
Cursor Echo
Cursor Echo ON allows the cursor position to be displayed on a radar display.
Radar cursor position will be displayed if you switch ON cursor echo at your
radar display.
Note: If you have two or more chartplotters in you system, you must not switch
ON cursor echo at more than one chartplotter. It is normal to switch ON cursor
echo at the unit adjacent to the radar display.
GPS Input
The chartplotter can receive position data via a SeaTalk, NAVAID or NMEA
connection. Where position information is available from more than one
source, SeaTalk will always take precedence. You can select whether the
NAVAID or NMEA has next priority.
Serial Output
If you want to use a printer, select
PRINTER
, otherwise select
NMEA
. This avoids
conflicts of printing NMEA data.
Printer Baud Rate
Select the highest baud rate that is compatible with both your printer and the
Raychart. Refer to your printer manual for further information.
Setting Up the Navigation Data
The
NAVIGATE
option, illustrated below, from the Set Up menu allows you to
set up your navigation preferences.
The following table lists the Navigate parameters and their options, shows the
factory default setting, and provides a space for you to make a note of your new
default setting. Each parameter is described in the following subsections.
Summary of Contents for RayChart 630
