15
Chapter 2: Getting Started and Controlling the Chart Display
Using
Chart Cards
3. Hold the card with the metal contacts facing left and the text “front
insertion” towards the card slot. The C-MAP label will be facing right, as
shown in the illustration.
4. Gently push the card into one of the two slots. It will only go in if it is the
right way round.
Push the card in as far as it will go, then move it to the left so that the top is
under the retaining pegs. Release the card so that it is held in place by the
pegs.
5. Close the card cover so that is clicks shut, to stop water splashing into the
chartplotter.
6. Display the chart information by pressing the RANGE key to change the
chart scale.
D3353_2
Removing a Chart Card
➤
To remove a chart card:
1. Open the card cover, at the top left of the chartplotter front panel, by
pushing the latch to the left (see above).
2. Press down the card you wish to remove, and move the top of the card to the
right to clear the retaining pegs.
3. Pull out the card.
Displaying the Chart Data
The new chart information will be displayed when you move the cursor into an
area covered by the new chart and zoom in.
Summary of Contents for RayChart 630
