Raymarine RAY91 VHF Page 133 Installation And Operation Instruction Manual Download

Page: 133 / 168

Region

Contact

Sweden
(Raymarine subsidiary)

• E-Mail:

[email protected]

• Tel: +46 (0)317 633 670

Finland
(Raymarine subsidiary)

• E-Mail:

[email protected]

• Tel: +358 (0)207 619 937

Norway
(Raymarine subsidiary)

• E-Mail:

[email protected]

• Tel: +47 692 64 600

Denmark
(Raymarine subsidiary)

• E-Mail:

[email protected]

• Tel: +45 437 164 64

Russia
(Authorized Raymarine distributor)

• E-Mail:

[email protected]

• Tel: +7 495 788 0508

12.2 Viewing product information

Product information can be found on the Startup screen.
1. Power up the radio.

The startup screen is displayed which shows the model and software version of the product.

Alternatively product information can also be displayed by selecting

About this unit

from the

Maintenance

menu:

Menu > Set-up > Maintenance

12.3 Learning resources

Raymarine has produced a range of learning resources to help you get the most out of your products.

Video tutorials

Raymarine official channel on YouTube:

•

YouTube

LightHouse™ 3 tips and tricks:

•

Raymarine website

Video Gallery:

•

Raymarine website

Note:

• Viewing the videos requires a device with an Internet connection.

• Some videos are only available in English.

Training courses

Raymarine regularly runs a range of in-depth training courses to help you make the most of your
products. Visit the Training section of the Raymarine website for more information:

•

http://www.raymarine.co.uk/view/?id=2372

Technical support

133

Summary of Contents for RAY91 VHF









































































































































































Search results

Summary of Contents for RAY91 VHF

Reviews:

Related manuals for RAY91 VHF

Brands by name

Popular brands

Raymarine RAY91 VHF, Installation And Operation Instruction Manual

Search results

Summary of Contents for RAY91 VHF

Reviews:

Related manuals for RAY91 VHF

Brands by name

Popular brands