Raymarine RAY63, Installation And Operation Instruction Manual

Page: 95 / 208

9.3 Controls and interface
The controls and interface available are as follows:
Base station
1. Built-in speaker
2. Rotary knob with center OK push button — Press knob in to access menu and DSC functions
and to confirm selections. Turn rotary clockwise or anti-clockwise to move up and down through
menu items or to change channel from the Homescreen.
3. LCD
4. VOL/SQ — Turn knob to adjust volume or squelch up and down. Press center button to switch
between volume and squelch control.
5. DISTRESS — Push up the spring loaded cover and press this button to make a DSC distress call.
6. 16 / + — When powered on press to switch between priority channels.
7. Power — Press to power the unit on. Press and hold for 3 seconds to power the unit off.
Momentary press to access the shortcut list.
8. Back — Move back through menu options.
Fistmic
1. PTT (Push to Talk) — Press and hold to send a voice message. Release to return to receive mode.
Note: The maximum transmit time is limited to 5 minutes to prevent un-intentional transmissions
from occupying the VHF channel.
2. Speaker
3. Microphone location
Getting started
95