44
Ray101 Handheld VHF Radio
4.16 USER Channel Mode
Press and hold the
HI/LO / USER
key while in normal operation mode to enter
User Mode. The USER and SAVED indicators appear.
USER Channel Mode displays only the channels that you have saved to memory,
which enables you to easily use your favorite channels while bypassing unwanted
or seldom-used channels during a scan.
Note:
The procedure for saving a channel to memory is outlined in Section 4.14, Adding
While in User Mode:
• Press and release the
SCAN/SAVE
key to start Memory Scan mode.
• Press and release the Channel UP or Channel DOWN key to scroll through the
saved channels.
• Press and hold the
SCAN/SAVE
key to delete the current channel from mem-
ory list.
• Press
16/9
to terminate User mode and switch to the Priority Channel.
Note:
You cannot switch Channel sets while in User Mode. The WX/BAND key does not
function and sounds an error beep if pressed.
Press and hold the
HI/LO / USER
key for 3 seconds to quit User mode and return
to the last-used working channel.
