Chapter 4: Operating the Radio
29
Chapter 4: Operating the Radio
4.1 Turning the Power ON and OFF
Turn the
PWR/VOL
knob clockwise until it clicks.
When the unit powers up in Normal mode it:
1. Beeps, illuminates the backlight at full brightness, and displays all segments
and indicators for 2 seconds.
2. Displays the software version number on the LCD but without the decimal
point. For example, version 4.2 would appear as 42.
3. Recalls the last CH number, TX power settings and operation mode.
If no last-used setting data exists, goes to CH 16 and high TX Power.
➤
To turn the unit OFF:
Rotate the Volume knob completely counterclockwise until it clicks.
4.2 Setting the Volume
Adjust the
PWR/VOL
knob to control the loudspeaker volume level. Turn
clockwise to increase the volume; counterclockwise to decrease the volume.
Note:
Key press beep volume is also controlled by the VOL level.
D6700-2
