Raymarine Ray 90, Installation And Operation Instruction Manual

Page: 84 / 192

5.11 Entering your MMSI number
To program your radio with your MMSI number follow the steps below.
From the Set-up menu: ( Menu > Set-up )
1. Select DSC set-up .
2. Select MMSI .
The MMSI required message will be displayed if no MMSI number has been set.
3. Select Yes .
4. Use the Channel Up and Channel Down buttons to cycle through the available numbers and
press OK to confirm each number and move to the next digit.
Important:
You should only enter the unique 9 digit MMSI number provided by your licensing authority.
MMSI numbers starting with a ‘0’ are only used for groups and coast stations. If you enter a ‘0’ as
the first digit the radio will assume you are entering a coast station MMSI and automatically assign
a ‘0’ as the second digit; this is to ensure a group MMSI is not entered as the radio’s unique MMSI.
5. Press the Back button at any time to edit digits you have already entered.
6. Press and hold the OK button to display options to change the position of the cursor.
84