Raymarine Ray 90, Installation And Operation Instruction Manual

Page: 60 / 192

4.9 Connecting GNSS (GPS) and VHF antennas
The radio must be connected to suitable GNSS and VHF antennas (not supplied). The antenna
connections must be protected so it cannot come into contact with any grounded bare metal.
Pre-requisites:
• Ensure you have installed your antennas in accordance with the instructions supplied with the
antennas.
• Ensure the cables have been properly routed to the Base station and that sufficient cable length is
available to make the connections.
1. Plug the antenna connector into the relevant antenna connection on the Base station.
2. Secure by tightening the locking collars.
60