Raymarine Ray 90, Installation And Operation Instruction Manual

Page: 131 / 192

9.2 Loud Hailer
The Ray70, Ray90 and Ray91 can be connected to a Loud Hailer.
In Hailer mode anything spoken into the handset is amplified and broadcast from the hailer. The
message is not transmitted over VHF/DSC.
When the hailer is active VHF calls cannot be sent or received.
Using the hailer
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int .
1. Select Hailer .
Hailer mode is now active
2. Press and hold the PTT button.
3. Speak your message.
4. Release the
PTT button.
5. Press the Back button to exit Hailer mode.
6. The hailer listening volume can be adjusted at any time in Listening mode using the Volume
Control .
7. The hailer talking volume can be adjusted at any time, with the PTT button pressed using the
Volume Control .
Hailer, Fog horn, and Intercom
131