Raymarine Ray 90, Installation And Operation Instruction Manual

Page: 124 / 192

8.7 AIS receiver
Depending on variant your radio may have a built-in AIS receiver.
With the built-in AIS receiver switched on AIS information can be sent to a connected Raymarine®
MFD using either NMEA 0183 or SeaTalkng ®.
Note: If using the built-in AIS receiver and outputting over NMEA 0183, ensure that the baud rate
is set to 0183 High speed : Menu > Set-up > Network output .
Switching AIS on and off
From the Set-up menu: Menu > Set-up .
1. Select AIS .
Selecting AIS will switch the internal AIS receiver On and Off.
124