Raymarine MICRO-TALK, Installation Instructions Manual, Page: 75 / 84

1. SeaTalkng spur cables:
• 0.4 m (1.3 ft) Spur cable ( A06038 ).
• 1 m (3.3 ft) Spur cable ( A06039 ).
• 3 m (9.8 ft) Spur cable ( A06040 ).
• 5 m (16.4 ft) Spur cable ( A06041 ).
2. 0.4 m (1.3 ft) Elbow (right angled) to elbow spur cable ( A06042 ). Used in confined spaces where
a straight spur cable will not fit.
3. 1 m (3.3 ft) Elbow (right angled) to straight spur cable ( A06081 ). Used in confined spaces where a
straight spur cable will not fit.
4. SeaTalkng to stripped-end spur cables (Connects compatible product that do not have a
SeaTalkng connector such as transducer pods):
• 1 m (3.3 ft) SeaTalkng to stripped-end spur cable — A06043
• 3 m (9.8 ft) SeaTalkng to stripped-end spur cable — A06044
5. 0.3 m (1.0 ft) ACU / SPX autopilot to SeaTalkng spur cable ( R12112 ). Connects the course
computer to the SeaTalkng backbone. This connection can also be used to provide 12 V dc
power to the SeaTalkng backbone.
SeaTalkng ® backbone cables
SeaTalkng backbone cables are used to create or extend a SeaTalkng backbone.
• 0.4 m (1.3 ft) Backbone cable ( A06033 ).
• 1 m (3.3 ft) Backbone cable ( A06034 ).
• 3 m (9.8 ft) Backbone cable ( A06035 ).
• 5 m (16.4 ft) Backbone cable ( A06036 ).
• 9 m (29.5 ft) Backbone cable ( A06068 ).
• 20 m (65.6 ft) Backbone cable ( A06037 ).
SeaTalkng ® power cables
SeaTalkng power cables are used to provide the SeaTalkng backbone with a single 12 V dc power
source. The power connection must include a 5 amp inline fuse (not supplied).
Spares and accessories
75