Raymarine MICRO-TALK, Installation Instructions Manual

Page: 54 / 84

9.1 Transducer calibration
The Micro-Talk gateway combines SeaTalkng ® and MicroNet networks together.
Prior to powering on the Micro-Talk gateway for the first time you must ensure that all transducers
are calibrated. This is particularly important with the Mast rotation device, which must be linearized
after and independently of your primary heading source. This means 2 linearizations are required,
the first for the heading source and second for the Mast rotation device, which uses the linearized
heading source as an input.
Please refer to the documentation that accompanied your products for calibration/linearization
instructions.
9.2 Autonetworking
Micronet wireless products are networked together using the Autonetworking procedure.
Autonetworking connects compatible wireless products, within range, to the same Micronet network.
Autonetworking — compatible Micronet displays
Autonetworking can be initiated using one of the compatible Micronet displays shown below.
Product Description
T070 Race Master Display
T110 Multifunction wireless display
T111 Multifunction wireless dual display
T112 Multifunction wireless analogue display
T113 Multifunction wireless remote display
54