Raymarine MICRO-TALK, Installation Instructions Manual

Page: 36 / 84

6. Insert the unit into the mounting tray, ensuring the tabs in the Mounting tray are slotted into the
grooves around the edge of the unit.
7. Orientate the Mounting trim so that the release hole is accessible when mounted.
8. Place the Mounting trim over the unit slightly offset, and then twist the Mounting trim clockwise
until it locks into position.
7.8 Surface mounting using the Riser
The optional Deck Mounting kit (A80437) can be used to raise the product from the mounting surface,
for installations where the cabling needs to be above-surface.
The Wall bracket is not required when using the Riser.
36