Raymarine Lighthouse Sport 3.10 Series, Advanced Operation Instructions, Page: 91 / 178

7.6 Tides mode
Tides mode suppresses chart detail to enhance tide and / or current information and provides set
and drift vectors for your vessel. Tide mode also displays an animation progress bar. Depending on
the cartography in use, tide and / or current station symbols may be replaced with dynamic graphics.
Dynamic graphics can be animated using the
Animate tides option which enables playback of tide
and / or current predictions for a 24 hour period.
Note:
• Set and drift vectors require a paddle wheel transducer.
• Animations are only available on supported cartography. Refer to your cartography provider
for more information.
• Tides mode requires accurate date information, taken from your GNSS / GPS position data.
Alternatively, you can input a specific date manually.
1. Animation progress bar — The bar fills with Blue as the animation progresses for the current 24
hour period, or Green when playing animations from a different period.
2. Playback controls — Provides controls to play and stop animation playback or skip forwards or
backwards through the animation.
3. Dynamic tide graphic — Available when using Navionics cartography.
4. Drift value — Provides drift value in specified speed units.
5. Set vector — Vector arrow identifies tide direction
6. Dynamic current graphic — Available when using Navionics cartography.
Note:
The data provided in the tide and current graphs and graphics is for information purposes only and
must NOT be relied upon as a substitute for prudent navigation. Only official government charts
and notices to mariners contain all the information needed for safe navigation.
Using animation controls
The animation controls can be selected using the Directional pad and OK button.
With cartography containing tide data selected in the Chart app:
Chart app
91