Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 377 / 504

d. [Docking scene] — optimized for use when the boat is docking at
night.
2. [IR Focus] — shown when autofocus is activated, to indicate the progress
of the operation.
3. (1) [Increase focus] — manually increases camera focus.
4. (1) [Autofocus] — enable/disable autofocus.
5. (1) [Decrease focus] — manually decrease focus.
Note: (1) For cameras that support manual focus, the controls are
displayed temporarily when you tap the touchscreen.
6. Azimuth (Position) and Elevation (Tilt) indicator — Shows the azimuth
(or direction) of the camera relative to the vessel, as well as the vertical
tilt of the camera. The triangle shows the approximate camera field of
view (FOV). The diamond shows the approximate camera position.
7. Payload — Identifies the type of video feed being displayed, e.g. thermal
or visible light.
a. [Thermal video feed]
b. [Daylight / visible light video feed]
8. [Zoom out]
9. [Zoom in]
25.3 Opening the Video app
The Video app is opened by selecting an app page icon from the
Homescreen which includes the Video app.
Pre-requisites:
1. Ensure your video feed is compatible by checking the latest details
available on the Raymarine website against your device’s specification. If
in doubt please contact an authorized Raymarine dealer for advice.
2. Ensure you have installed your video device in accordance with the
documentation that was supplied with your device.
The Video app will open in 1 of 3 states:
Note:
If the Video app is opened soon after powering on your system, you may
have to wait for the device(s) to finish booting before the video feed is
displayed.
Video feed displayed
If your device is powered up and operational then the Device’s video feed
is displayed.
Camera not yet available
The ‘ Camera not yet available ’ message is displayed if:
• a Video app page is opened before the camera has finished booting up.
• connection to the camera is lost.
Video app
377