Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 327 / 504

22.1 Dashboard app overview
The Dashboard app enables you to view system data. System data may be
generated by your MFD or by devices connected to your MFD via SeaTalkng ®
/ NMEA 2000 and ethernet. The Dashboard app can also be configured to
provide monitoring and control of your compatible digital switching devices.
Note:
For data to be available in the Dashboard app it must be transmitted to your
MFD from compatible hardware using supported protocols and messages.
The Dashboard app can be displayed in Fullscreen and half screen portrait
app pages.
For each instance of the Dashboard app you can select which pages you
want to display, Page selection will persist over a power cycle.
Example Dashboard app pages
The Dashboard app is pre-configured with a number of customizable pages
based on your chosen MFD profile and connected devices.
Dashboard app onscreen controls
MFD app use icons for controls which are permanently onscreen.
The following control icons are available in the Dashboard app:
1. [Home] — Closes the app and displayed the homescreen.
2. [Waypoint / MOB] — Momentary press places a new waypoint at your
vessel’s current location. Long press activates the Man Over Board
(MOB) alarm.
3. [Pilot] — Opens and closes the pilot sidebar.
4. [Menu] — Opens the app menu.
5. [Sidebar] — Press and slide right to open the sidebar.
6. [<] (Left arrow) — Displays the previous data page.
7. [>] (Right arrow) — Displays the next data page.
Switching data page
1. Use the [<] (Left arrow) and [>] (Right arrow) located at the bottom of the
screen, to cycle through the available data pages.
2. Alternatively, you can select a specific data page from the app menu.
Selecting data pages to display
For each instance of the Dashboard app you can select which data pages
you want to be available.
1. Select the
[Pages] tab: [Menu > Settings > Pages] .
Dashboard app
327