Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 283 / 504

Standby (Not transmitting)
If the ‘ Standby ’ message is displayed then select [Transmit] to begin
transmitting.
Transmitting
If your Radar scanner is connected, powered up and transmitting then the
Radar image is displayed and echoes/targets are displayed onscreen.
Putting the radar into standby
With your selected radar displayed onscreen:
1. Select [Transmit] from the main menu.
The radar scanner will stop transmitting and is put into standby mode.
Powering down your radar scanner
With your radar scanner in standby mode:
1. Select the
[Off] icon.
2. Select [Yes] to confirm power down.
The radar scanner will still consume a small amount of power whilst it is
powered off, this is to ensure the radar can be powered back up quickly.
20.5 Set up and configuration
Selecting a Radar scanner
On systems with 2 Radar scanners, you can select which Radar scanner is
used in each instance of the Radar app.
1. Select the
[Settings] (“cogs”) icon from the Radar app menu.
2. Select the [Scanner:] box on the [Transmission] tab.
A list of available Radar scanners is displayed.
3. Select the Radar scanner that you want to associate with the current
instance of the Radar app.
Radar app
283