Raymarine LIGHTHOUSE 4, Operation Instructions Manual

Page: 172 / 504

9. Select [Turn to waypoint] to begin active navigation to the next waypoint
in the route.
10. Follow steps 8 and 9 above until you reach the last waypoint in the route.
11. Select
[Disengage pilot] from the notification and then [Disengage pilot]
from the pop-over.
12. Alternatively, select [Maintain Hdg] from the notification and then [Engage
pilot] from the pop-over to maintain a locked heading on the current
course.
13. Select the [Stop Nav] onscreen icon located at the top of the screen or
select [Stop] from the context menu or [Navigation] menu to end active
navigation.
You can end active navigation at any time by selecting the [Stop Nav]
onscreen icon located at the top of the screen or selecting [Stop] from the
context menu or [Navigation] menu.
For more information on routes and route management refer to: 9.2 Routes
Automatic turning
Automatic turning enables Evolution™ autopilots to automatically turn to the
next waypoint in a route. When the current waypoint arrival radius has been
reached a countdown will commence, and when it reaches zero the vessel
will automatically turn toward the next waypoint.
The Automatic turning feature requires your Evolution autopilot to be
running software version 3.14 or later.
Note:
Waypoints must be farther apart than the [Arrival radius (pilot is track
mode)] distance.
Automatic turning is disabled by default. Automatic turning can be enabled
and configured from the
[Autopilot] settings menu: [Homescreen > Settings >
Autopilot > Automatically turn to next waypoint] .
During active navigation, Automatic turning can also be enabled and disabled
from the
[Navigation] menu: [Menu > Navigation > Auto. turn] .
Configuration
• [Arrival radius (pilot is track mode)] — The automatic turning to waypoint
notification is displayed when your vessel reaches the specified distance
from the current active waypoint.
• [Automatically turn to next waypoint] — When this option is enabled, your
vessel automatically turns to the next waypoint in a route.
• [Audible warning at automatic-turns] — When this option is enabled, the
MFD will sound an audible beep as the countdown reaches zero.
• [Automatic turn timeout] — Determines the length of the countdown timer.
If the waypoint arrival alarm is enabled, the Automatic turning to waypoint
notification is used.
Automatic turning to waypoint notification example
Select [Disengage pilot] from the turning to waypoint notification to
disengage the autopilot and prevent the vessel from automatically turning.
If the waypoint arrival alarm is disabled, the brief automatic turning
notification is displayed instead of the full turning to waypoint notification.
172