Raymarine LIGHTHOUSE 3 Advanced Operation Instructions Download

Page: 329 / 450

ClearCruise tab (Object Detection) / (Video Analytics)

Settings

Description

Options

Highlight detected
objects

Uses proprietary ClearCruise™ technology to
highlight and track objects detected in the water.

• Disable

• Enable

Beep on detection

When enabled, the MFD will audibly beep when
an object is detected.

• Disable

• Enable

Display estimated
range

When enabled, the MFD will display an estimated
range for highlighted objects (objects must be
closer than 300 ft).

• Disable

• Enable

Camera motion tab

Settings

Description

Options

Camera height
above the
waterline

To ensure correct alignment of the camera for
tracking purposes the height the camera has
been installed at, above the waterline, must be
set.

• 0ft to 99ft

Set forward
position

Adjust the Forward position of your camera

Displays the forward
alignment picture

Man overboard

Enables and disables automatic tracking of a
MOB alarm.
The most recent target is tracked.

• Disable

• Enable

Dangerous AIS
targets

Enables and disables automatic tracking of
Dangerous AIS targets.
The most recent target is tracked.

• Disable

• Enable

Dangerous MARPA
targets

Enables and disables automatic tracking of
Dangerous Radar targets.
The most recent target is tracked.

• Disable

• Enable

Enable scan

Enables and disables Surveillance mode.
Surveillance mode pans the camera left to right
continuously to the specified speed

• Disable

• Enable

Scan width

Determines how far the camera pans from left to
right when in Surveillance mode.

• Narrow

• Medium

• Wide

Scan speed

Determines the speed at which the camera pans
from left to right when in Surveillance mode.

• Slow

• Medium

• Fast

Page settings

Settings

Description

Options

Edit data overlays

Add data overlays to video feed.

• List of data overlays

16.4 Maritime (M-Series) camera compatibility

Support for the various video features and settings, as per each M-Series camera variant.

For an explanation of the settings listed in the following table, refer to:

p.326 — Video app settings

Not applicable to product

—

Applicable to product

Video app

329

Summary of Contents for LIGHTHOUSE 3



































































































































































































































































































































































































































































Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands

Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Search results

Summary of Contents for LIGHTHOUSE 3

Reviews:

Related manuals for LIGHTHOUSE 3

Brands by name

Popular brands