Raymarine LIGHTHOUSE 3, Advanced Operation Instructions

Page: 315 / 450

Note:
• A default interval of 100 hours is displayed at the top, this is the recommended maximum amount
of time you can use your engine(s) before a service is required.
• Additional user configurable intervals can be customized by long holding each row and choosing
the interval length.
Advanced
The Advanced tab is used during the installation and calibration of your Yamaha engine(s). For more
information on how to install and calibrate your Yamaha engine(s) refer to Yamaha engine installation
manual or Yamaha dealer.
Options:
Gateway reset — System protocol information reset.
Engine instances reset — Engine instances reset. Engine(s) will be reordered based on engine
position:
Engine Port Central or
Central Port Central
Starboard Starboard
Single Engine 0
- - -
Twin Engine 0
- -
1
Triple Engine 0 1
-
2
Quad Engine 0 1 2 3
All pages reset — All data items on each data page are reset to default.
Fuel flow offset — Set the Fuel flow offset value in accordance with your Fuel flow gauge reading.
Trim Calibration — Calibrate your engine trim by pressing Set to zero if any number other than 0
is showing on the Trim Position when engine(s) have stopped.
Yamaha app
315