Raymarine i70, Installation Instructions Manual, Page: 27 / 76

Connecting the display to an existing NMEA2000 (DeviceNet)
backbone
2
3
4
D12060-1
1
1. i70 instrument display
2. SeaTalk ng to DeviceNet adaptor cable.
3. DeviceNet backbone.
4. NMEA2000 equipment.
3.6 Transducer connections
Transducer installation ST70 pod
Transducer pods are available for wind, depth and speed. For
detailed installation instructions refer to documentation supplied
with pods.
• Fit transducers to pods. Pod terminals are color-coded, so
ensure that each wire is connected to the correspondingly-colored
connector.
• Fit each pod to the SeaTalk ng backbone using the 400mm
SeaTalk ng spur cable and T piece supplied with each pod. Pods
must be located no further than 400mm from their corresponding
connection points on the backbone.
SeaTalk
ng
1
2
3
D12061-1
Cables and connections 27