6.1 Controls
1
Display / Power
— Select to access Depth
information on the digital display, adjust
backlight, adjust contrast and power the
display On and Off
2
True / App
— Switch between true and
apparent wind direction
3
VMG / Down
— Display Velocity made good.
Use to move down through menu options or to
decrease numeric values
4
Tack / Up
— Tack heading. Use to move up
through menu options or to increase numeric
values
6.2 Power
Powering on the unit
The unit will automatically turn on with the system,
unless it has previously been powered off using the
Power
button.
With the unit powered off:
1. Press and hold the
Power
button until the screen
turns on (approximately 2 seconds).
Powering off the unit
1. Press and hold the
Power
button until the count
down timer reaches zero and the screen turns off.
Note:
When powered off, the unit may still draw
a small amount of power from the battery, if this
is a concern unplug the power supply or switch
off at the breaker.
Calibration alert
If the
CAL
legend on the digital display flashes for
the first 30 seconds after power up, refer to the
Calibration
section to calibrate your unit.
34
