Raymarine gS Series, Installation And Operation Instructions Manual, Page: 45 / 208

14.6 AIS status symbols
AIS status is indicated by a symbol in the databar.
Symbol Description
AIS unit is switched on and operating.
AIS currently unavailable.
AIS unit is switched off, or not connected.
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active alarms.
AIS unit is connected and switched on, but
has active alarms.
AIS unit is connected and switched on, but
the dangerous and lost alarm is disabled.
14.7 AIS silent mode
AIS silent mode enables you to disable AIS transmissions
AIS silent mode enables you to disable the transmitting functions
of your AIS equipment. This is useful when you do not want to
transmit your vessel’s AIS data to other AIS receivers, but still
wish to receive data from other vessels.
Note: Not all AIS equipment supports silent mode. For more
information, refer to the documentation that accompanies
your AIS unit.
Enabling and disabling AIS silent mode in
the Chart application
From the Chart application:
1. Select Menu .
2. Select AIS Options or *Radar & AIS Options .
3. **Select Targets .
4. Select AIS Set-up .
5. Select Silent Mode .
Selecting Silent Mode will switch AIS silent mode On and Off.
Note:
*When Radar overlay is also enabled the menu name
becomes
Radar & AIS Options .
** Step 3 is only required when Radar overlay is enabled.
Enabling and disabling AIS Silent Mode in
the radar application
From the Radar application:
1. Select Menu .
2. Select Targets .
3. Select AIS Set-up .
4. Select Silent Mode .
Selecting AIS Silent Mode will switch silent mode On and Off.
AIS function 131