Raymarine gS Series, Installation And Operation Instructions Manual, Page: 114 / 208

17.18 Transducer set-up menu options
The Transducer Set-up menu should be used when setting up your multifunction display for the first time or when installing
a depth transducer.
Menu Item Description Options
Transducer
Select the appropriate transducer type from those displayed.
Some transducers may be detected by the system
automatically. Options available are dependent on the sonar
module connected.
Speed Transducer Select the appropriate speed transducer from those available.
This option is only available if you are not using a combined
Depth/Speed or Depth/Speed/Temperature transducer. Options available are dependent on the sonar
module connected.
Depth Offset Offset represents the depth of the transducer relative to:
• Waterline = 0.0 ft and above.
• Keel = 0.1 ft and below.
• –9.8 to +9.8 feet — or equivalent units
Speed Offset Offset applied to the speed log. • 0 to 100%
Temperature Offset Offset applied to the temperature transducer value. • –9.9 to +9.9 °F — or equivalent units
200
gS Series