Raymarine G-Series system, Installation Instruction

Page: 76 / 180

4.1 Potential ignition source
Ensure the product is not installed in a hazardous atmosphere.
This product is NOT approved for use in hazardous/flammable
atmospheres. Do NOT install in a hazardous/flammable atmosphere
(such as in an engine room or near fuel tanks).
4.2 GPM processor unit
Location requirements
When selecting a location for the unit it is important to consider a
number of factors.
• Do NOT install near sources of heat or vibration (for example,
an engine).
• Install below decks in a dry area.
• The unit is NOT designed for use in a sealed enclosure. Access
to the unit is required for software and chart updates.
• Must be mounted on a vertical surface. Sides and top must be
level.
• Mounting surface must be firm, secure and capable of supporting
the weight of the unit.
Ventilation requirement
To ensure the product does not overheat:
• Ensure there is always adequate air flow around the whole unit,
especially around cooling vents.
• Allow adequate separation of equipment.
• Avoid any contact between the unit and any metal object or
surface.
76 G-Series installation instructions