Raymarine e7D, Installation And Operation Handbook, Page: 167 / 270

14.11 Fishfinder scrolling
The fishfinder image scrolls from right to left. You can pause the
scrolling or adjust the scroll speed, to ease placing of waypoints or
VRMs on-screen.
Scroll speed
You can adjust the speed at which the fishfinder image scrolls. A
faster speed provides more detail which may be useful when you
are looking for fish. If you select a slower speed the information
remains on the display for longer.
Scroll pause
You can pause the display to see a ‘snapshot’ of the fishfinder
image. When the image is paused scrolling stops but the depth
indication continues to be updated. Scroll pause/resume affects the
currently selected fishfinder frequency.
If you are in dual frequency mode, you can pause one frequency
while the other continues to scroll. This allows you to inspect a
paused image while the other frequency continues to scroll and
detect fish.
Note: Scrolling will resume if the frequency changes. For
example an automatic change of frequency resulting from a
change in depth.
Adjusting the fishfinder scrolling speed
From the fishfinder application:
1. Select Menu .
2. Select Presentation .
3. Select Scroll Speed .
4. Use the Rotary Control to adjust the scroll speed to the required
setting.
5. Press the Ok button, or select the Scroll Speed menu again to
confirm the setting.
Pausing the fishfinder scrolling image
From the fishfinder application:
1. Select Menu .
2. Select Scroll so that Pause is highlighted.
Selecting Scroll will switch between Scroll Pause/Resume.
14.12 Fishfinder waypoints
Placing a waypoint on the fishfinder display enables you to mark a
position so that you can return to it later.
When a waypoint is placed, its details are added to the waypoint list
and a vertical line labelled WPT is displayed on screen. You can edit
waypoints and navigate to them in the fishfinder window.
Placing a Waypoint in the fishfinder application
using touch
This only applies to HybridTouch displays.
From the fishfinder application:
1. Select and hold the required location.
The fishfinder context menu is displayed.
2. Select Place Waypoint .
Placing a waypoint in the fishfinder application
From the fishfinder application:
1. Press the WPT button.
The waypoint menu is displayed.
2. Whilst the waypoint menu is open:
• Press the WPT button again to place a waypoint at your
vessels position, or
• Select the appropriate option: Place Waypoint At Vessel,
Place Waypoint At Cursor or Place Waypoint At Lat/lon.
Using the fishfinder
167