Raymarine Dragonfly 6, Installation And Operation Instructions Manual

Page: 28 / 116

4.3 Fitting the display in the cradle
Follow the steps below to fit the display into the
cradle.
1. Ensure the cradle is securely mounted.
2. Position the display so that the guide on the left
hand side of the display lines up with the guide
on the left hand side of the cradle.
3. Pivot the display so that the guide on the right
hand side of the display lines up with the guide
on the right hand side of the cradle.
4. Place your thumb on the front of the display and
your fingers behind the tab.
5. Push the display into the cradle until it clicks into
place securely.
4.4 Fitting the 7 inch display in the
cradle — Cradle down
Follow the steps below to fit the 7 inch display into
the cradle in the cradle down orientation.
Note: When mounting the cradle in the cradle
down orientation the display must still be fitted the
correct way up.
1. Ensure the cradle is securely mounted.
2. Position the display so that the guide on the right
hand side of the display lines up with the guide
on the right hand side of the cradle.
3. Pivot the display so that the guide on the left
hand side of the display lines up with the guide
on the left hand side of the cradle.
4. Place your thumb on the front of the display and
your fingers behind the locking tab.
5. Push the display into the cradle until it clicks into
place securely.
Engaging the safety latch
The cradle supplied with the 7 inch display includes
a Safety Latch that should be used to help secure
the display to the cradle.
Note: The Safety Latch MUST be used when
mounting in the cradle down orientation,
alternatively you can use a compatible third party
security lock.
1. Safety Latch in unlocked position.
2. Safety Latch in locked position.
Follow the steps below to engage the safety latch:
28
Dragonfly 6 / Dragonfly 7