Raymarine CYCLONE, Installation Instructions Manual

Page: 44 / 92

8.1 Warnings and cautions
Important: Before proceeding, ensure that you have read and understood the warnings and
cautions provided in the Chapter 1 Important information section of this document.
8.2 Schematic diagram
A schematic diagram is an essential part of planning any installation. It is also useful for any future
additions or maintenance of the system. The diagram should include:
• Location of all components.
• Connectors, cable types, routes and lengths.
8.3 Tools required
The following tools are required for installation.
1. Drill
2. 13 mm (0.5 in) and 17 mm (0.6 in) spanner
3. Drill bit (appropriate size dependent on thickness and material of mounting surface)
4. Jigsaw
5. Pozi-drive screwdriver
6. Denso paste
7. 50 mm (2 in.) Hole saw
44