Cr
op
Cro
Cro
Cro
Cro
p
Cro
Cro
Cr
op
Fo
l
Fo
l
Fo
l
Fo
l
Document number: 81272_1 Date: November 2005
User Guide
Installation
The adapter cable should be used to connect the display and the power supply to
the camera. The adapter cable connections are shown below
.
If you do not have a breaker in the power circuit, an in-line 0.5 A quick blow fuse
should be fitted to the positive (red) lead of the cable.
Maintenance and Troubleshooting
Your Raymarine CAM 100 does not contain user-serviceable parts.
They should be serviced only by authorized Raymarine service
technicians at a Raymarine factory facility.
Routine Maintenance
Routine maintenance should be carried out on a regular basis:
•
Examine all cables for signs of damage such as chafing, cuts or nicks.
•
Check that all cables are securely connected.
•
Spray the camera and lens with fresh water and wipe with a soft lint-free
cloth to remove debris or salt deposits.
Troubleshooting
EMC conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. The design and
manufacture of Raymarine equipment and accessories conforms to the
appropriate Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not compromis
ed.
Problem
Solution
Camera does not function
1. Make sure that the cable is sound and
that all connections are tight and free
from corrosion.
2. Check system fuses.
3. Check that the display is set up
correctly to receive the images.
Refer to the relevant display
handbook for full details.
Red +12 V
Black - 0 V
Video connector
D8537_1
CAM 100
Technical specification
Technical support
Format
PAL 752 x 582 pixels
NTSC 768 x 494 pixels
Imager
1/3 Sony Super HAD CCD (Super Hi resolution)
Horizontal resolution
550 TVL
Scanning system
PAL 625 lines
NTSC 525 lines 2:1 interlaced
Video output
Composite 75 Ohms
Infra red
14 IR LEDs
LED spectrum
30 degrees for 15m
Minimum illumination
0.1 Lux at F2 - no IR, 0 Lux - with IR
Waterproof
IPX6 and CFR46
Power connection
12 V tinned leads
Video connections
Male BNC
Operating temperatures
-10
o
C to +55
o
C (-14
o
F to 130
o
F)
Power consumption
130 mA - day, 280 mA - night, IR on @12 V DC
North and South America
Raymarine Technical Support
1-800-539-5539
or, +1 603-881-5200
Product Repair and Service
Raymarine Product Repair Center
21 Manchester Street,
Merrimack, NH
03054-4801
USA
Europe, Middle East, Africa
and Australasia
Raymarine Technical Support
+44 (0) 23 9271 4713
Product Repair and Service
Raymarine plc
Anchorage Park
Portsmouth
PO3 5TD
England
Help us to help you
To allow us to respond to your needs faster, please quote the Equipment
type, Model number and Serial number when requesting service
Complete product information and interactive help is available at:
www.raymarine.com
D8538 1
Technical Support
D8531_1
