Option
Description
Min safe height:
Enter your vessel’s maximum unladen height from the waterline.
To ensure adequate clearance, it is recommended that you
add a safety margin to this figure to allow for variation caused
by vessel movements.
Min safe width:
Enter your vessel’s maximum width at its widest point. To
ensure adequate clearance on both sides, it is recommended
that you add a safety margin for port and starboard to this figure
to allow for variation caused by vessel movements.
Min safe depth:
Enter your vessel’s maximum depth when fully laden. This is
the depth from the waterline to the lowest point on the vessel’s
keel. To ensure adequate clearance, it is recommended that
you add a safety margin to this figure to allow for variation
caused by vessel movements.
Num of engines:
Select the number of engines on your vessel. When connected
to a compatible system, your MFD can monitor engine data.
Identify engines:
Once you have selected the number of engines, select
Identify
engines
and follow the onscreen instructions to configure your
engines. May require an extra hardware interface to enable
engine data to be displayed.
Num of Batteries:
Configures your system with the number of batteries on your
vessel.
Fuel tanks:
Configures your system with the number of fuel tanks on your
vessel.
Units of measure
You can select your preferred units for data readings from the
Units
tab of the
Settings
menu:
Homescreen > Settings > Units
.
Measurement
Units
Measurement
Units
Distance units:
• Nautical Miles
• NM & m
• Statute Miles
• Kilometers
Volume units:
• US Gallons
• Imperial Gallons
• Liters
Speed units:
• Kts
• MPH
• KPH
Economy units:
• Distance per Volume
• Volume per Distance
• Liters per 100 km
Depth units:
• Meters
• Feet
• Fathoms
Wind speed units:
• Knots
• Meters per Second
Temperature units:
• Celsius
• Fahrenheit
Pressure units:
• Bar
• PSI
• Kilopascals
Date format:
• MM:DD:YYYY
• DD:MM:YYYY
• MM:DD:YY
• DD:MM:YY
Time format:
• 12hr
• 24hr
34
