Raymarine axiom pro 9 RVX, Installation Instructions Manual

Page: 99 / 360

13
Data sources menu
When a system includes multiple sources of a data type, such as depth
data, the system will choose the most appropriate source for the data.
If you prefer, you can manually select your own data source.
The Data sources menu can be accessed on your Data master MFD,
from the Settings menu: Homescreen > Settings > Network > Data
sources.
Each tab enables you to view and select your preferred data source.
The currently active data source will display its current value in use.
Data source selection can be manual or set to automatic:
• Auto — your MFD will automatically select a device.
• Manual — you can manually select your preferred device.
Networked MFDs will automatically be updated to use the Data
sources selected on your Data master MFD.
Identifying engines
Engine data can be displayed on your MFD if your engines are
transmitting the relevant supported data on to the MFD network. If
your system has mislabelled your engines then you can correct this
using the Engine identification wizard.
The Engine identification wizard can be accessed from the Boat details
tab: Homescreen > Settings > Boat details > Identify engines.
1. Ensure the correct number of engines is selected in the Num of
Engines: box.
2. Select Identify engines.
3. Follow the onscreen prompts to complete the engine identification
wizard.