Raymarine axiom pro 9 RVX, Installation Instructions Manual, Page: 46 / 360

4.6 Network connection
Your MFD can be directly connected to a compatible product using the RayNet network connection.
Your MFD can also be connected to a network of products when using a suitable network switch.
1. RayNet to RayNet cable — Connect one end of the RayNet cable to your MFD and the opposite
end to a RayNet device or RayNet network switch.
2. RayNet to RJ45 cable — Connect the RayNet end of the cable to your MFD and the opposite end
to a RJ45 device or RJ45 network switch or coupler.
3. Compatible network devices, such as a Network switch, Radar scanner, Sonar module, Thermal
camera etc.
Note:
• Refer to the instructions supplied with your network product for specific connection information.
• Refer to Chapter 9 Spares and accessories for a list of available network cables.
46