Raymarine axiom pro 9 RVX, Installation Instructions Manual

Page: 102 / 360

16
Activating touchlock
In rough weather conditions precipitation may lead to erroneous
touches being detected by the touchscreen. In these conditions you
can use touchlock to prevent this.
1. Select Activate touchlock from the Shortcuts menu.
With touchlock activated the touchscreen will be disabled. To
re-enable the touchscreen, swipe from left to right across the
Power button swipe area.
Radar standby
You can place a transmitting Radar in Standby from the Shortcuts
menu.
1. Select Stop Radar tx from the Shortcuts menu.
Autopilot shortcuts
When Autopilot control is enabled, the Shortcuts page provides an
Autopilot icon which can be used to engage and disengage your
autopilot. When the autopilot is engaged in Locked heading mode you
can also adjust the locked heading from the Shortcuts page.
Adjusting brightness
LCD brightness can be adjusted from the Shortcuts menu.
1. Swipe your finger from left to right across the Power button swipe
area.
The Shortcuts menu is displayed
2. Move the Display brightness control along the slider bar to adjust
the brightness.
With the Shortcuts menu displayed you can also use the Power
button swipe area to increase the brightness level in increments,
by repeating the left to right swipe.
2.3 Memory card compatibility
MicroSD memory cards can be used to back up / archive data (e.g.
Waypoints, Routes and Tracks). Once data is backed up to a memory
card, old data can be deleted from the system. The archived data can
be retrieved at any time. It is recommended that your data is backed
up to a memory card on a regular basis.
Compatible cards
The following types of MicroSD cards are compatible with your MFD: