Raymarine axiom pro 9 RVX, Installation Instructions Manual

Page: 133 / 360

47
Autorouting
Autorouting is available when using compatible cartography.
Autorouting allows you to build a route automatically between a point
on the chart and your vessel.
You can select any point on the Chart and from the Chart context
menu select Autoroute to here or you can select Autoroute to from
an existing waypoint’s context menu to create a route automatically
between your vessel and the chosen point.
The created route is generated by comparing data available on your
cartography against the minimum safe distances specified in the Boat
details menu: (Homescreen > Settings > Boat details).
Waypoints will not be placed in areas that conflict with your specified
minimum safe distances. Caution symbols are used for waypoints that
are near objects or restricted areas.
Never follow a route before checking each route leg is safe for your
vessel.
Reviewing an automatically generated route
Before following any route you must ensure that it is safe to do so.
Upon Route completion:
1. Range in on each route leg and waypoint that make up the Route.
2. Check either side of the route leg and around the waypoint for
any possible obstructions.
Obstructions can be charted objects or restricted areas. Routes
generated automatically should use the caution waypoint symbol
in areas where there are possible obstructions.
3. Where obstructions exist move the necessary waypoints so that
the waypoint and route leg is no longer obstructed.