Raymarine Axiom Pro 12, Installation Instructions Manual

Page: 81 / 360

RayNet to RJ45 adapter cables
Description Typical use Quantity
1 Adapter cable with a RayNet
(female) socket on one
end, and a waterproof
(female) socket on the
other end accepting the
following cables with an
RJ45 SeaTalk hs waterproof
locking (male) plug:
• A62245 (1.5 m).
• A62246 (15 m).
A typical use for this adapter cable is to
connect a
DSM300 sonar module to a
LightHouse MFD, using all-waterproof cable
connections. This adapter cable will also
accept the following
RJ45 SeaTalk hs cables,
although the RJ45 plug that connects at the
equipment end (e.g. DSM300 ) will NOT be
waterproof:
• E55049 (1.5 m).
• E55050 (5 m).
• E55051 (10 m).
• A62135 (15 m).
• E55052 (20 m).
1
2 Adapter cable with a RayNet
(female) socket on one end,
and a waterproof (female)
RJ45 socket on the other
end, along with a locking
gland for a watertight fit.
Directly connect a Raymarine radar scanner
with an
RJ45 SeaTalk
hs
(male) cable to
a RayNet network switch (e.g. HS5 ) or
LightHouse MFD.
1
3 Adapter cable with a RayNet
(male) plug on one end,
and an
RJ45 SeaTalk hs
waterproof (male) plug on
the other end.
Connect a legacy G-Series GPM-400 , C-Series
Widescreen or E-Series Widescreen MFD to
a Raymarine radar scanner supplied with a
RayNet power / data cable.
1
Spares and accessories
81