Raymarine Axiom Pro 12, Installation Instructions Manual

Page: 117 / 360

31
GNSS Settings
The settings for your GNSS receiver (internal or external) can be
accessed from the Satellites menu: Homescreen > GNSS pop-over >
Satellites > Settings.
From the GNSS Settings tab you can:
• activate and deactivate use of Differential positioning (SBAS)
• set the COG/SOG filter according to your vessel’s oscillation, which
provides more stable COG and SOG readings
• enable and disable your MFD’s internal GNSS receiver. Disable if
you do not want to use this unit’s internal GNSS receiver as a source
for positioning data.
• restart the GNSS receiver that is being used as the source for your
positioning data.
3.10 Status area
You can view the status of peripheral devices connected to your MFD
using the Status area, located at the top right of the Homescreen.
This area also provides the Time and identifies when the MFD is in
Touchlock mode.