Raymarine AXIOM 2 PRO, Installation Instructions Manual

Page: 18 / 126

3.2 Typical systems
Examples of typical systems.
Note:
Power supply connections are not shown in the following example. For
details on how to connect power to your devices, refer to the power
connection details in the applicable device instructions.
Example basic system
1. Raymarine thermal camera (M300 illustrated).
2. Raymarine network switch (RNS-5 illustrated).
3.
Raymarine radar scanner (Cyclone™ illustrated).
4. SeaTalkng ® instrument (i70s illustrated).
5. External GNSS antenna (e.g.: GA200, part number A80589).
6. Example Raymarine CHIRP sonar transducer, compatible with the Axiom
2 Pro S variant (CPT-S illustrated, connected via A80490 adaptor cable).
7. Axiom® 2 Pro display.
8. SeaTalkng ® 5-way block (terminated SeaTalkng ® CAN bus network).
9.
Example Raymarine RealVision™ Max sonar transducer, compatible with
the Axiom 2 Pro RVM variant (RVM-100 illustrated).
Note:
Power supply connections are not shown in the following example. For
details on how to connect power to your devices, refer to the power
connection details in the applicable device instructions.
Example expanded system
1. Raymarine thermal camera (M300 illustrated).
2. YachtSense ™ Link Marine Router.
3.
YachtSense ™ Digital Control System (Master module assembly illustrated).
4. Raymarine radar scanner (Cyclone™ illustrated).
5. External GNSS antenna (e.g.: GA200, part number A80589).
6. Example Raymarine CHIRP sonar transducer, compatible with the Axiom
2 Pro S variant (CPT-S illustrated, connected via A80490 adaptor cable).
7. Axiom® 2 Pro display.
18