Raymarine AXIOM 2 PRO Installation Instructions Manual Download

Page: 110 / 126

24.4 RayNet to RayNet cables and connectors

Standard RayNet connection cable with a RayNet (female) socket on both ends.

2. Right-angle RayNet connection cable with a straight RayNet (female) socket on one end, and a right-angle RayNet (female) socket on the other end.

Suitable for connecting at 90° (right angle) to a device, for installations where space is limited.

RayNet cable puller (5 pack).

RayNet to RayNet right-angle coupler / adapter. Suitable for connecting RayNet cables at 90° (right angle) to devices, for installations where space is limited.

5. Adapter cable with a RayNet (male) plug on both ends. Suitable for joining (female) RayNet cables together for longer cable runs.

110

Summary of Contents for AXIOM 2 PRO































































































































Search results

Summary of Contents for AXIOM 2 PRO

Reviews:

Related manuals for AXIOM 2 PRO

Brands by name

Popular brands

Raymarine AXIOM 2 PRO, Installation Instructions Manual

Search results

Summary of Contents for AXIOM 2 PRO

Reviews:

Related manuals for AXIOM 2 PRO

Brands by name

Popular brands