Raymarine AXIOM 2 PRO, Installation Instructions Manual

Page: 104 / 126

23.5 Connections specification
Specification
Accessory connection: USB Micro B (for external card reader
connection).
Analog video connections: Composite BNC connectors via
Power/Video/Audio cable.
Audio connections:
Left and Right RCA connectors via
Power/Video/Audio cable.
Ethernet connections:
RayNet (10/100/1,000 Mbits/s) x 2.
GPS antenna connection: TNC type connector.
HDMI connections: Micro HDMI (Type D) (v1.4b) output
connector.
NMEA 0183 connection: NMEA 0183 TO NMEA 2000 convertor
required (part number: A80721).
NMEA 2000 connection:
DeviceNet connector (Load Equivalency
Number = 1).
Bluetooth connection: Bluetooth: v4.0 combined with Wi-Fi
module.
Wi-Fi connection: Multiband - 2.4GHz, and 5Ghz 802.11b/g/n
• Dual MIMO (Multiple In, Multiple Out) @
2.4 GHz
– 1x Antenna is used for Wi-Fi only
– 1x Antenna is used for both Wi-Fi and
Bluetooth
2.4GHz only (can simultaneously operate as
an access point and as a host)
• SISO (Single In, Single Out) @ 5 GHz
– 1x Antenna is used for Wi-Fi only
– 1x Antenna is used for Bluetooth only
Specification
Transducer connections
(RVM variants): • 25-pin RV / RVM connector.
• 11-pin 1kW connector.
Transducer connections (S
variants): 25-pin RV / RVM connector (requires
adaptor cable for CPT-S only transducers.
23.6 Internal GNSS (GPS) receiver specification
Specification
Almanac Update: Automatic
Antenna: Internal antenna, optional external antenna
connection.
Channels: Track up to 28 satellites simultaneously.
Cold start (Time To First
Fix):
<2 minutes.
Geodetic Datum:
WGS-84 (alternatives can be selected on
the display)
GNSS compatibility:
• GPS
• GLONASS
• Beidou
• Galileo
Operating frequency: 1574 MHz to 1605 MHz.
Position Accuracy:
• Without SBAS: <= 15 meters 95% of the
time.
• With SBAS: <= 5 meters 95% of the time.
Receiver IC Sensitivity: • 165 dBm (Tracking)
• 160 dBm (Re-acquisition)
• 148 dBm (Cold start)
Refresh Rate: 10 Hz (10 times per second)
104