Raymar 3460, User Manual, Page: 47 / 171

3460 Fast’R
3-2
Issuing Network Management Commands
You enter network management commands from network management
software. The 3460 Fast’R modem accepts commands from:
• Telenetics or Motorola Fast’RVu software (see Chapter 4)
• Telenetics or Motorola 9000 NMS software (see NMS
documentation)
What Are Option Sets?
Option sets are predefined configurations. The modem comes with two
option sets. You can either:
• Operate the modem with one of these option sets
• Build on an option set with custom options
Option sets do not include such site-specific parameters as telephone
numbers, which you must enter and save.
Managing Option Sets
The modem is pre-set with Option Set 1 as the active configuration.
• For asynchronous application protocols, build on Option Set 1
with any custom or site-specific parameter options
• For synchronous and leased-line application protocols, build on
Option Set 2 with any custom or site-specific parameter options
Select one of the following procedures to customize an option set. The
AT commands you need are listed in Table 3-1 and Table 3-2.